Save UP TO 5% with code UPTO5OFF

BMW Manual Trans Selector Rod (Double Shear) - UUC Motorwerks DSSR1273

Manual Trans Selector Rod (Double Shear) DSSR1273 Main Image
Ships in 6-8 days [ info ]
Logo for UUC Motorwerks
Add to Cart

Manual Trans Selector Rod (Double Shear) by UUC Motorwerks

One significant wear area that has never been addressed previously is the wear and ovalization of the linkage connection points at the transmission and the shifter's lower pivot. In the original BMW design, the connection at both ends has a large injection-molded plastic bushing. The design of the selector rod has a pin at 90 degrees to the main rod, which exerts a tremendous amount of leveraged force on the selector joint bushing from one side (known as a single shear force). The result is a steady deformation of the bushing, resulting in looseness and slop in the entire mechanism.

The looseness and slop are magnified by the leverage-multiplication effect of the shift lever itself. The result is an in-gear shifter "free play" of 3/4" and up to 1" in either direction, over 35mm total.

To permanently fix this, a change in the fundamental design of the pivot is required, changing the assembly to a double shear system with the UUC Double Shear Selector Rod (DSSR). The DSSR redistributes the torsional forces from the pin/bushing interface to the complete face area on both sides of the selector joint. By taking advantage of the strength of steel in the DSSR and the body of the joint, the problem of deformation is eliminated and the movement of the selector rod correlates directly to movement of the selector joint - the only "free play" movement remaining in the shifter assembly is from within the transmission itself. In-gear "free play" is reduced to approximately 10mm total when used with a UUC EVO3 shifter.

The DSSR is compatible with all brand shifters, whether original BMW or aftermarket.

Country of Manufacture: United States
Manufacture Quality: Performance
Shipping Weight (lbs): 0.323

Other Customers Also Purchased

  • $61.49
    Engine Oil (5W30) (5 Liter) (Green) B71051
    Logo for Bizol
  • $45.99
    Engine Oil (5W30) (5 Liter) (All Round) B75111
    Logo for Bizol
  • $52.99
    Engine Oil (5W30) (5 Liter) (Technology) B75821
    Logo for Bizol
  • $41.99
    Engine Oil (5W40) (5 Liter) (Protect) B75211
    Logo for Bizol
  • $9.24
    Oil Clean (o90) B2351
    Logo for Bizol

About UUC Motorwerks

UUC Motorwerks Logo

UUC Motorwerks was started in 1998 by a group of motorsport enthusiasts. These performance minded people had the desire to produce street upgrades and race components that would be of the highest quality available.

"When we see the need for a part, it's because the offerings in the marketplace are simply not good enough. If we can make it better, we'll make it. If we make it, it will be the best. That's our design and manufacturing philosophy here at UUC Motorwerks. ...If you ever get these kinds of questions: 'Why do you need new wheels when the old ones are fine? Why do you need new suspension if the current ones aren't worn out? Isn't your current car fast enough?' - we empathize with you." - UUC Motorwerks

UUC is committed to feeding your automotive addiction. is proud to offer these quality products to our Motorsport enthusiast customer base.

If this is not the exact Manual Trans Selector Rod (Double Shear) you are looking for, or you would like this part in a brand other than UUC Motorwerks, please call us at (800) 467-9769 and one of our customer service experts will help you locate the exact part you need.

Vehicle Fitment & Notes

Click a year range, make, and model below for additional information.

+ BMW 335i 2009-2013

Warranty® is pleased to offer a one (1) year warranty on all parts. Your Manual Trans Selector Rod (Double Shear) may be exchanged if it is defective within 365 days of your purchase date. Defective parts are only eligible for an exchange or store credit. No cash refunds will be issued for previously installed parts.

After one (1) year® will honor any extended manufacturer warranties. No exchange will be offered outside of the manufacturer's warranty process. Parts covered by the manufacturer warranty need to be exchanged through the manufacturer and may take up to 4-6 weeks.

If you would like to initiate a warranty claim or have questions about the process, please call us at (800) 467-9769 and a knowledgeable customer service expert will assist you.

Delivery & Returns

Delivery Info® proudly offers FREE shipping available on most orders. Some weight and size restriction apply. We also provide inexpensive and guaranteed 3 day, 2 day, and Overnight shipping options, so if you need your Manual Trans Selector Rod (Double Shear) tomorrow,® can deliver!

Every® order is fast, reliable, and track-able, meaning you'll know exactly where your Manual Trans Selector Rod (Double Shear) is at every step of the delivery process.® also displays your Expected Ship Date and transit time in your Cart, making our entire shipping process simple and transparent.

Every order consisting of all "In Stock" parts received before 5 PM ET Monday – Friday will ship the same business day. Every order consisting of all "In Stock" parts received after 5 PM Monday – Friday will ship the next business day.® stocks and ships all of our parts from our warehouse in Windsor, CT. Do not be fooled by drop shippers that claim to have everything and then hit you with three delivery charges. All of our parts come in the same box quickly and via your chosen delivery method and carrier. That's the® stock and ship advantage.

Returns Info® proudly offers a ninety (90) day cash return for all items purchased through®. The item must be new and in its original manufacturer packaging to be eligible for a cash refund.

If you would like to return an item or have questions about the process, please call us at (800) 467-9769 and one of our customer service experts will be happy to help.